Recent content by Jduckip3

Has anyone noticed a latency issue when watching a QuickTime video? Seems to may have started around IOS 6, but cold just be coincidence. Connection speed is good at 15mb down, so that should not be the issue. Happens with various sites.

No problems here. WiFi sync works fine each time. I use it for both my iPad3 and iPhone. Never had to change any settings in the network. You do have to activate the first time with a wired connection.

Turn the security off on your router for a few minutes. It if works then, it's the security, if not, security isn't an issue, turn it back on (in either case turn it back on when you are done with the test) I had to return my first iPad 3 because the 5ghz wireless a/n wasn't working. Unit was...

I had an issue where I could not connect the wireless a/n 5ghz but could connect fine on wireless g 2.4ghz. Turned out to be a problem with the iPad. As the previous post said,check and at least make sure you can see the SSID of the wireless. One other good test would be to find a hotspot and...

It's great that you have the new iPad. You do need a wireless router. I Googled the 526B, and it looks like it could be the Dlink 526B DSL modem. If it is, it has the wireless router built in. It will have three small antennas on top based on the picture i saw All you need to do is setup the...

Update: Well as it turns out, it was the iPad. I found an Airport to try to connect to, and could not connect to it as well on the 5ghz side. I went the Apple Store, and they verified the problem. They gave me a new unit, and it connected perfectly. Must have just been something a miss with...

When I select wifi in Settings, I show both SSIDs. I can select either one. It's strange, the 2.4 starts right up, I get "Unable to Join Network" when I select the 5.

Hum, thank you. That is the model I have. Mine works fine on the 2.4, but I can't join the 5. Did you make any changes to the router for that band? I set the SSID, left the channel defaulted to 40, entered the Paraphrase. If you wouldn't mind sometime, would you check the security you selected...

I have installed a new home router. It is a Netgear N600 Advanced Dual Band router. I can get the new iPad to connect to the G/N 2.4 GHz just fine. But, I can not get the iPad to join the 5GHz band. I have reset the Network Settings, tried running the band with no security etc. I called...

I have had the IVisor AG on my new IPad since day one. Well, today I took it off. It is like a completely different screen. So much nicer, cleaner and bold. Didn't think I would do it, but I don't see me going back to the protector.

Depends. Some USB ports on pc's do not actually contain a high power source. Generally, these are the front buss USB ports. Generally, the ports on the back are the only powered ports. Plug the same cable in a back port if available and see what happens. This is the way my current HP is...

From what I read it has to be an AirPrint capable printer. I bought an HP Wireless with AirPrint, and I can print from the iPhone and IPad. Also, you can print to it from any device that can send email. It has it's own email address, and when you send to that address it prints. Pretty cool.

They charged me $15 for my IPad 2.

I think it does somewhat. Appears to have more to do with the viewing angle. Some screens doesn't seem to have any impact at all.

I have the Verizon model. The Personal Hotspot button is directly under General Settings, not Network.