What's new
Apple iPad Forum 🍎

Welcome to the Apple iPad Forum, your one stop source for all things iPad. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Wiping all Cydia Tweaks without Restoring and Rejailbreaking

willerz2

iPF Novice
Joined
Feb 22, 2012
Messages
1,341
Reaction score
255
Location
New York
Update 11.21.14: SemiRestore8 has been released to support iOS 8.1 and below devices

This guide is compatible with iOS 4.0 through 7.0.6 on all devices for ILEX R.A.T., and iOS 5.0 through 8.1 on all devices for SemiRestore8.

So this was brought up to me this morning during work when a few of my colleagues installed incompatible tweaks and would end up stuck on the Apple logo, and since they didn't have Safe Mode, they weren't able to remove the incompatible tweak. But, since they're just stuck on the Apple logo, and they had absolutely no clue what the name of the Cydia tweak was, it's difficult to remove the tweak..... So, with that, I used their phones as lab rats to try out ILEX R.A.T. (See what I did there?)

The Catch:
ILEX R.A.T. WILL brick your phone if you're using Siriports. If you installed ANYTHING remotely similar to Siriports/Fake Siris, etc, etc through Cydia, and you DO NOT remove it manually, I WILL 100% GUARANTEE that you WILL brick your device. GUARANTEED. If you have a Siriport, and you plan on using ILEX R.A.T., you MUST manually remove Siriports and replace all of its associated system mods. ILEX R.A.T. and SemiRestore7 WILL NOT resolve system file issues as a result of using the "Erase All Contents and Settings" function in Settings.


What's iLEX R.A.T.?

ILEX R.A.T. stands for Remove All Tweaks. Basically this removes each and every installed app, tweak and dependency EXCLUDING the defaults from Cydia, so after you've jailbroken your device a while back, and you installed your hundreds of packages, it'll all be removed with a single command.

What this is primarily used for is if your device ends up in a state where you cannot enter Safe Mode since you don't have it, or if your device is stuck on any screen but is still recognized by your PC, or, if your device can be placed into Safe Mode and you can't remove the tweak for some reason. The bigger use for this would be the general request of "How do I clean my device of all jailbroken apps and start over without restoring". We've all had that thought run through our minds once our devices start to act sluggish.

So say you have an iPhone 5, and you're on 6.1.2. Your device is acting sluggish, or you're giving it to a family member because you decide that you want a fresh out of the box iPhone 5 instead of your 5 month old iPhone 5. You want to wipe all your tweaks and such so that your successor can install what they please, but because the latest iOS is not jailbreakable, you don't want to restore, and since you have every single Cydia tweak installed, it'll take you ages to delete them all manually. This will be for you.

This will work for all devices but has a few other requirements as well that you'll have to keep in mind when using ILEX R.A.T.

Where Do I Start?



The tweak is simple. Simple download, install, and respring manually. It's an few KB deb, nothing huge.


Note: After extensive testing, I highly recommend that users avoid the ILEX R.A.T. GUI. The progression of the wiping is imperfect in the GUI, so you have to first make sure that your device is not going to sleep because that will pause the progression, and that in most cases, you will not be able to see what is on your screen, so you will not be warned when you are to reboot your device. The command terminal may be slightly more work in terms of setup, but is a safer route.


Method 1- Removing only Cydia tweaks.

To implement the R.A.T feature, you'll need to use a single command, "rat". How do you use the command? Well we have several options
  • MobileTerminal (you can install this free from the default Cydia repos)
  • PuTTy (for Windows users)
  • Terminal (default for OS X users)
  • iFunBox (both Windows and OS X users)
  • Any other utility that allows you to run commands from your PC
(You can download MobileTerminal and iLEX RAT from the above repository)


Once you need the feature, simple open up any of these prompts (enabling SSH may be required for utilities like PuTTy and such), and type in 'rat'. You don't have to actually have to enter your credentials for Root access. Simply have a connection between your command terminal to your device (or simple open up MobileTerminal on your device) and type in "rat" without quotes.

Example would be the following command line:

iPhone:~ mobile$ rat

And run the command. Then follow the simple instructions that crop up on your screen. Make sure you heed all warnings and read carefully. It's basically just a series of "Y" and "N" options and such.

KbqAuP3.png


So to remove all tweaks, once you've ran your command, type in "1", then tap Return. It'll start to compile a list of all tweaks and such that R.A.T will remove. When it asks for do you want to remove ILEX R.A.T, you can say Y or N, that's up to you. Saying Y will not cause your device to blow up, it'll just purge itself after the process. I'd say to say N so that just to keep it there as a future contingency plan.

Next a prompt will come up warning you that all tweaks will be installed, but your jailbreak AND unlock will be retained (so yes, UltraSn0w and the Fixer, if applicable, will stay if you're relying on them). "Y" and return again.

R.A.T will now go through the compiled list that its made and remove all the tweaks. This process will take a few minutes or more depending on how many tweaks you have installed. It'll then ask if you want to remove all tweak settings. "Y" if you just want to wipe and start fresh, "N" if you're going to re-install the same tweaks and such.


Summarized Instructions:


1. Open Command Terminal
2. Type in "rat", return.
3. "1", return
4. "Y" or "N", return (Y to remove R.A.T along with everything, N to keep)
5. "Y", return
6. "Y" or "N", return (Y to delete all user settings, N to keep all user settings)
7. Respring/reboot

You're done. I recommend re-springing or rebooting your device as you would be prompted to when you uninstall a tweak from Cydia that affects the system files.



Method 2- Removing everything except your barebone jailbreak

This method is slightly different from the first method. The first method is used to strictly remove your jailbroken tweaks and settings. Method 2 however, allows you to wipe your device BUT keep your jailbreak. For many users, they're experiencing lag, slow performance, etc, etc., and they want to restore but yet keep their jailbreak, this feature basically replicates the "Erase All Contents and Settings" in Settings.app, BUT, if your device is jailbroken, using the stock version rather than this version will result in you being issues that will require you to do a manual DFU restore, meaning you'll lose your jailbreak and will have no way of turning back for A5+ users.

KbqAuP3.png


Option 12. iLEX-RESTORE: Revive, Speed Up, Clean Up.

Basically you follow the set-up instruction like method 1, except this time, instead of choosing option '1', you choose option '12'. Resulting in the below screen

NZckK6R.png


Remember that this option will wipe your device, and keep the jailbreak/UltraSn0w that's on your device (if applicable). Type in 'Y', Enter. And it should begin. It'll take a few minutes or longer depending on what you have on your but in the end, it'll wipe your device as if you tapped on the "Erase All Content and Settings" that you normally do not tap on a jailbroken device because it will mess up your device.

Summarized Instructions:

1. Open Command Terminal
2. Type in "rat", return/enter
3. "12", return/enter
4. "Y", return/enter
4A. "Y" or "N", return/enter (ILEX R.A.T. will ask whether or not you want to remove MobileTerminal as well if you're using MobileTerminal)
5. Reboot

---------------------------------------------------------------------------------------------------------------------------------------------

SemiRestore (iOS 5.0 - 8.1)

Why use SemiRestore?

SemiRestore8 works for all iOS 5, 6, 7 and 8 devices. I've tested this on several devices including ARM64 devices as well as the iPhone 6/6+, and none of them are experiencing boot loops or Recovery loops at all. Also unlike ILEX R.A.T., SemiRestore retains your Cydia user profile (User, Hacker, Developer) so you won't have to re-set it, it will retain truly crucial packages (which ILEX R.A.T. does as well, but ILEX R.A.T. also saves some residual data in some cases), and it utilizes OpenSSH. Though it utilizes OpenSSH, you will still need to plug your device in.

What you will need

  • OpenSSH (installed through Cydia)
  • Your password to be changed back to the default password 'alpine' if you've changed it.
  • SemiRestore for Windows || Linux
* Theoretically it should ask for your SSH password if you've changed it, but for the sake of ensuring a smooth process, I recommend changing it back to alpine, then changing it again afterwards.

Note: The images are that of SemiRestore7, but it looks exactly the same for SemiRestore8, just that the text is changed from 7 to 8.

Step 1: Extract SemiRestore

P8P8mkn.png


Step 2:
Run SemiRestore (as an administrator on Windows) and connect your device

37Zr0sR.png


Step 3:
Click on the SemiRestore button

s8hUWuC.png


*At this point, if your SSH password is not the default 'alpine', SemiRestore will ask for you to input your password. If you've reverted it back to 'alpine', you won't have to do anything as it will progress to the next step.

Step 4:
You may or may not see this step. This step occurs extremely quickly so you may not see this.

msgXuvQ.png


Step 5: Do not touch your device. Your device will be locked (if your lock timer has been exceeded) or you will see your Springboard if your lock timer has not been exceeded or it has been set to Never.

zGJD4Qf.png


Step 6: Do not touch your device. Your device will be locked (if your lock timer has been exceeded) or you will see your Springboard if your lock timer has not been exceeded or it has been set to Never.

qaDIu3r.png


Step 7: Your device will now perform a reboot. This step is the longest. Depending on how much data is on your device, this can range from 5 minutes to 30 minutes if not more.

ecSJ0hP.png


Step 8: You're finished. You can now reinstall your packages and restore from an iTunes backup that you've made prior to utilizing SemiRestore.

azIriWS.png






Disclaimer:
I DO NOT own or take ANY credit for creating these utilities, nor do I take any cred for creating other utilities that are used to implement this tweak. Also, we DO NOT endorse the ILEX RAT owner's secondary repository, nor do I recommend using it. I take NO PART in any problems that arouse when you choose to use the secondary repo or from the utilization of these utilities.
 
Last edited:

bifftaz

iPF Noob
Joined
Aug 21, 2012
Messages
22
Reaction score
4
Location
UK
Nice tutorial. Just wish I had found something like this before I wiped my iPad & updated to 6.1.3.
 

rocketi05

iPF Noob
Joined
Sep 27, 2012
Messages
10
Reaction score
1
Thank you very much. My iPad was getting a little sluggish. Needed a revamp!
 
OP
willerz2

willerz2

iPF Novice
Joined
Feb 22, 2012
Messages
1,341
Reaction score
255
Location
New York
Added MobileTerminal as well to the repo for users that opt for the MobileTerminal method.
 

basmantard

iPF Noob
Joined
May 16, 2013
Messages
10
Reaction score
0
i tried to use this with mobile terminal on my ipad 3 with jb ios 5.1.1

i just downloaded mobile terminal and it says

mobile$ rat
-sh: rat: command not found

what do i do now?
 

basmantard

iPF Noob
Joined
May 16, 2013
Messages
10
Reaction score
0
nevermind, you didnt say to look into the repository and download the latest version lol, i found it
 
OP
willerz2

willerz2

iPF Novice
Joined
Feb 22, 2012
Messages
1,341
Reaction score
255
Location
New York
I'm pretty sure the thread revolved around ILEX R.A.T. and not MobileTerminal. MobileTerminal is just a means of using the command, not the core of the thread itself.
 

basmantard

iPF Noob
Joined
May 16, 2013
Messages
10
Reaction score
0
I'm pretty sure the thread revolved around ILEX R.A.T. and not MobileTerminal. MobileTerminal is just a means of using the command, not the core of the thread itself.

i just meant that you need to go into the source and download ILEX R.A.T. before you can use MobileTerminal

BTW the source is "cydia.myrepospace.com/willerz2/"

if you dont put the extra "/" at the end it wont validate. this is just info for all the other noobs out there
 
OP
willerz2

willerz2

iPF Novice
Joined
Feb 22, 2012
Messages
1,341
Reaction score
255
Location
New York
Updated to include option 12, which simulates the "Erase All Contents and Settings" that you normally should not and would not use on a jailbroken device, except this method will work, and will allow you to retain your jailbreak.
 
OP
willerz2

willerz2

iPF Novice
Joined
Feb 22, 2012
Messages
1,341
Reaction score
255
Location
New York
Added SemiRestore, an alternative but similar method to ILEX R.A.T. This method can be done via USB or SSH, and supports Windows, Mac OSX, SSH and Linux. The UI is very Evasi0n/Absinthe-esque. A single window, with a single button.
 
OP
willerz2

willerz2

iPF Novice
Joined
Feb 22, 2012
Messages
1,341
Reaction score
255
Location
New York
Updated repo/source for iLEX RAT as well as 1.0.3 for Semirestore
 
OP
willerz2

willerz2

iPF Novice
Joined
Feb 22, 2012
Messages
1,341
Reaction score
255
Location
New York
Semirestore is now tagged (beta;unstable) because of the inconsistencies that it brings. Some users report it working, some report it not working. I will leave it here as a potential option, but for best results, ILEX R.A.T. is recommended
 
OP
willerz2

willerz2

iPF Novice
Joined
Feb 22, 2012
Messages
1,341
Reaction score
255
Location
New York
Semi-restore has been removed from lack of upkeep from the developer. Because the utility is far from the level of development of ILEX R.A.T., it's safer to resort to ILEX R.A.T. than to risk being forced to restore, which contradicts the purpose of this guide.
 

gobbles

iPF Noob
Joined
Apr 1, 2013
Messages
21
Reaction score
0
So I still need would need to download mobileterminal even if I run iLex rat on an ipad?
Does iLex Rat have to be installed on the iPad in order to work or could I connect my iPad to a PC and run it from the PC when the iPad messes up?
 

Most reactions

Latest posts

Top