Separate names with a comma.
200 milli amps more likely. 200 amps would be like running a welder!
Two amps here from London. They do drop.
sent with love from my iPad on IPF
You need a car charger that is at least 2.1 amps. Look for the griffin one
DO NOT USE THE 10V!
You risk frying the iPad since it requires 5V 2.1 amps.
? = 100/120
.83 = Amps
So it's less than half the power of the iPad charger, which outputs 2a (or 2000ma) if my math/equations are correct.
...It does charge, just VERY slowly. The iPads require something like 10 amps, while the iPods are like 2 amps (notice how large the iPad charger...
It is 10 watts, 5 volts x 2 amps (output). I think the USB port of most laptops is limited to 0.5 amps x 5 volts = 2.5 watts.
Sent from my iPad2...
Not full voltage, amps, and watts coming through?
Like if you have it on a power strip or something?
The iPad requires a higher current (2.1 amps) compared to the iPod, which is 1 amps. Depending on the actual current delivered by your USB port,...
It depends on the brand of car charger. Some will charge at the 2 amps needed by the iPad and some only supply .5 amps which are made to charge...
try the ichargepro 16 from Matrix Plus Ltd (uk), simultaneously charges 16 ipad or mobile devices at 5v at up to 2 amps
The iPhone draws up to 1 amp in power whereas the iPad 2 needs 2 amps. This will heat up the transformer in the charger.
As long as the USB extension can handle 2 amps continuous of course.
Hi, have a look at the ichargePro16, from Matrix Plus Ltd (uk) it charges 16 ipads or mobile devices simultaneously at 5v @ up to 2 amps....
Yippee , 5 of six power amps , one more in the post on its way .
Sent from my awesome iPhone 5S 64gb Gold using ipf
is the charger you are using not putting out enough voltage, or amps?
if you are using an aftermarket charger it might be the
Gifting power amps is impossible. You have to get them from flights, preferably Berlin.
I sent a neighbour request, would you accept please?
Pretty cool. I ran McIntosh amps back when I was big into car stereo. They output a totally unique sound and I loved it.
Yes please... 40 to go still no amps dropped.
Just looking at Troglodyte96's airport. Seems his mortality rate is of a similar ratio to mine....
The iPod charger delivers a lower current (1 amps, compared to the iPad charger's 2.1 amps) so charging an iPad will take a bit longer.
I am no expert, but understand a PC USB output is 5V 0.5 amps, whereas the iPad mains charger output is 5V 2.0 amps, thus not enough power from...
...a cigerette lighter adapter that has two USB ports and supplies 10 amps. No one locally has anything more than 2.1 amps. I may have to hard...
The large amps will not damage the unit. The device will only consume what they need. If it was more voltage then there is a big problem.
There are none there I can see that are dual and capable of charging an iPad (2.1 amps).
Has anyone found an Apple app similar to the Win app that ASUS built that raised the amps through the USB port?
After installing that software, iPad does get charged via USB. Perhaps may not be as fast as via mains charger.
...to amazon or radio shack and get a car charger that is rated for two amps and all will be well. The ones you are using are only capable of...
So...does anyone know if you can use the Amplitube amps in GarageBand? Unfortunately, I've been somewhat unimpressed with the amps in GarageBand...
You should be ok, if the wall charger puts out at least 500 milli amps (0.5amps) of current. A wall charger for blue tooth probably doesn't, my...
MOST usb outlets can't.
In point of fact, 10 watts is only 2 amps via USB (5volts) so any new Mac or reasonably high performance PC should have...
You have incorrect information. You need a 10 watt 2.1 amp adapter. Hope this helps.
You may have gotten volts confused with amps. There is no 12 volt charger for the iPad 4, but there is a 12 watt charger. All iPad chargers are 5...
Wal-mart had a 10 footer for the iPad 2.1 amps made by griffen. They price matched using shop n scan for $24.88
Sent from my iPhone using iPF
...just for the iPad. Technically speaking, most USB ports put out 0.5 amps @ 5 volts, the iPad charger puts out 2.1 amps @ 5v. That's what the...
So am I correct in assuming that if I use the iPad charger to charge my iPhone it could possibly damage it due to the higher amps?
Like toms cave said, anything under 2 amps will not charge. No damage will occur if you try it out on the one you have.
Sent from my iPad 2 using iPF
You are correct. My brain was not fully on.
And I did tell you my typical time to charge. Though since I rarely run my batter all the way down...
......... You can stop sending them now. Please send them again when the problem is solved.....or will it ever be?