Welcome to iPadForums.net Guest - Click Here to Register

Error 1013 Restoring to 4.3.3 Help Please.

This is a discussion on Error 1013 Restoring to 4.3.3 Help Please. within the iPad Hacking forums, part of the Apple iPad Discussions category; I messed with my cydia, now my Ipad 2 3g is stuck on recovery mode so I have no choice but to restore. My previous ...

iPadForums.net is the original Apple iPad Forum! Registered Users do not see these ads. Please Register - It's Free!
+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 27
  1. #1
    iPad Noob!
    Member #
    82004
    Join Date
    Jul 2011
    Location
    Philippines
    Posts
    4

    Unhappy Error 1013 Restoring to 4.3.3 Help Please.

    I messed with my cydia, now my Ipad 2 3g is stuck on recovery mode so I have no choice but to restore.
    My previous FW before it's stuck: 4.3.3

    SHSH saved:
    3234799361527-ipad2,2-4.3.3
    3234799361527-ipad2,2-4.3.5
    (and couple of 5bx blobs)

    Im using Tiny Umbrella v5.00.07 with the ff settings checked:
    save all availabe shsh....
    overwrite existing shsh....
    when connecting a device, prefer my custom device name...

    Here are my steps before getting the error:
    DFU mode
    run tss server
    shift+restore to: iPad2,2_4.3.3_8J2_Restore
    [iTunes Error 1013]

    Please help me,
    Thanks in advance

  2. Ads


  3. #2
    Banned
    Member #
    12904
    Liked
    35 times
    Join Date
    Aug 2010
    Location
    Raleigh, NC USA
    Posts
    3,655
    Sounds like the hosts file isn't right but let's see what f4780y says.

  4. #3
    Super Moderator
    Member #
    13576
    Liked
    1446 times
    Join Date
    Aug 2010
    Location
    Western NY state (USA)
    Posts
    11,053
    Yep, it's your hosts file. It's "pointing" the wrong way...

    So, you need to check and ensure you have no entry in your hosts for gs.apple.com. To find the hosts file on a Windows machine, go to Windows/System32/drivers/etc. Using WordPad, open the Hosts.ics file and put a hash mark (#) in front of any/all lines containing the phrase "gs.apple.com." Save the file.

    Note: If you have a Mac, let me know and I'll dig up the instructions for this process on a Mac...

    Once you've corrected the hosts file, you'll have to start over again to restore the iPad. First, begin with a clean, stock restore of 4.3.3. To do that, start at the DFU mode (outlined in this sticky: DFU Mode for Dummies). Once you've got it back to stock, then you can use JailbreakMe.com.

    That should work. Let us know, 'kay?

    Marilyn
    Space Gray 32GB WiFi-only iPad Air & Black 32GB iPhone 5 (both jailbroken on iOS 7.0.4 w/evasi0n7)
    * * * PLEASE READ * * * Forum Rules * * * Hacking Section Rules * * * PLEASE READ * * *

  5. #4
    iPad Noob!
    Member #
    82004
    Join Date
    Jul 2011
    Location
    Philippines
    Posts
    4
    so if i get that correct

    i should comment out all other entries in the host file
    and leave the gs.apple.com
    also, i'll put a "#" in front of those two lines, correct?

    another inquiry, will this still work even though apple is not anymore signing 4.3.4 (or do they)?

    thanks again..

  6. #5
    Super Moderator
    Member #
    13576
    Liked
    1446 times
    Join Date
    Aug 2010
    Location
    Western NY state (USA)
    Posts
    11,053
    Just to make sure we're on the same page...

    If you see something like 74.208.10.249 gs.apple.com, edit it so it then reads #74.208.10.249 gs.apple.com

    The hash mark goes in front of the whole line. And, it goes in front of any line you may have that contains that gs.apple.com phrase.

    If you think we still may be talking at cross-purposes to each other (or that I may be confused!), copy/paste your hosts file here ... then we can specifically edit it.

    As far as your question about 4.3.4, no worries. The TU version that you say you've got running (5.00.07) is the latest. I doublechecked Tiny Umbrella's web site (about your 4.3.4 question) and it says: Also, iPad 2 users can still restore to 4.3.3 if they have their 4.3.3 SHSH. Just 'Start TSS Server' and then start up iTunes and restore your 4.3.3 ipsw. TinyUmbrella should help you restore without a 10xx error.

    Huh? But, you have got the error ... and the most recent TU ... and the most recent iTunes ...

    So, I found this tip: Under the Advanced tab on TU is a setting named "Set Hosts to Cydia on Exit." In general, most users now prefer this to be UNTICKED. Doing so means that next time you try and upgrade your iPad to the latest firmware it will succeed rather than throwing an error in iTunes which will happen if you leave it ticked.

    So, if you have it ticked, UNtick it and try again (before mucking about in the Hosts file). If you already had removed the check mark and still got the error, ignore these three paragraphs and continue on with the Hosts file edit.

    Sorry about missing that part - but it's worth it to double check, yeah?

    There's a lot of "help" in there - so I hope some of it answers your question(s).

    Let us know the outcome...

    Marilyn
    Space Gray 32GB WiFi-only iPad Air & Black 32GB iPhone 5 (both jailbroken on iOS 7.0.4 w/evasi0n7)
    * * * PLEASE READ * * * Forum Rules * * * Hacking Section Rules * * * PLEASE READ * * *

  7. #6
    Banned
    Member #
    12904
    Liked
    35 times
    Join Date
    Aug 2010
    Location
    Raleigh, NC USA
    Posts
    3,655
    Hey! I was right!

  8. #7
    iPad Noob!
    Member #
    82106
    Join Date
    Jul 2011
    Location
    cambodia
    Posts
    2
    Hello everyone...I've tried everything you've told but I still got stuck (Error 1013). what should I do? please help.
    Thanks

  9. #8
    iPad Noob!
    Member #
    82004
    Join Date
    Jul 2011
    Location
    Philippines
    Posts
    4
    sorry, up to now, i cannot test whether the steps are working.

    i found this from the tinyumbrella site

    First, the version you WANT to restore to and the version Apple is currently signing must BOTH have the same baseband. This is important or else the baseband update will not work and you will get a 10xx error and need to use fixrecovery. (Works for iPhone 4 - will not work for iPad 2)

    so..does that mean that the 4.3.5 update updates your baseband?
    if so, we are doomed since it ipad2 3g cannot support fixrecovery.

  10. #9
    Super Moderator
    Member #
    14571
    Liked
    632 times
    Join Date
    Sep 2010
    Location
    Troon, Scotland
    Posts
    7,104
    Quote Originally Posted by oneway
    sorry, up to now, i cannot test whether the steps are working.

    i found this from the tinyumbrella site

    First, the version you WANT to restore to and the version Apple is currently signing must BOTH have the same baseband. This is important or else the baseband update will not work and you will get a 10xx error and need to use fixrecovery. (Works for iPhone 4 - will not work for iPad 2)

    so..does that mean that the 4.3.5 update updates your baseband?
    if so, we are doomed since it ipad2 3g cannot support fixrecovery.
    What that statement means is that the "FixRecovery" tool does not work on iPad2 since it relies on the limera1n exploit.

    The baseband on 4.3.5 IS THE SAME as 4.3.4 and 4.3.3. TinyUmbrella has been updated to allow the baseband signing process to bypass TU and get baseband blobs directly from Apple for iPad2. This should avoid the 1013 error altogether.

    If you are still getting a 1013 error when restoring, something is still wrong in the process. Rather than commenting / uncommenting lines from your hosts, simply delete EVERY reference to gs.apple..com from it, and also make sure you UNTICK "Set hosts to Cydia on exit" in TU and then exit the program. This should guarantee a completely clean hosts. I know Marilyn already said this, but it is important.

    Then restart TU and try again. "Start TSS Server", DFU Mode, Shift-Restore the 4.3.3 firmware. It should not generate an error for an iPad2 in this configuration.

    Check and recheck you actions. It is very easy to skip over stuff because you are assuming you are doing it right every time. I've wasted hours doing stuff like that in the past when the instructions were right in front of me and I was not following them correctly

    Good luck.
    Last edited by f4780y; 07-28-2011 at 03:39 AM.
    15" MacBookPro with Retina Display 16GB 3.4GHz i7 256GB | iPad4 WiFi 32GB 6.1.2 (evasi0n) | iPad3 4G 64GB 6.1.2 (evasi0n) | iPad2 3G 64GB 5.1.1 (redsn0w) | iPad1 3G 64GB 4.3.3 (jbme) |
    iPhone5 32GB 6.1.2 (evasi0n) | iPhone4S 64GB 5.1.1 (absinthe) | iPhone4 32GB 7.0b2 (stock) | iPhone3G 16GB 3.1.3 (jbme) | iPod Classic 6G 160GB (stock) | AppleTV 2G 5.0.2 (seas0npass)


    Please review the hacking section rules and our main rules before posting!

  11. #10
    iPad Noob!
    Member #
    82106
    Join Date
    Jul 2011
    Location
    cambodia
    Posts
    2
    Quote Originally Posted by f4780y View Post
    Quote Originally Posted by oneway
    sorry, up to now, i cannot test whether the steps are working.

    i found this from the tinyumbrella site

    First, the version you WANT to restore to and the version Apple is currently signing must BOTH have the same baseband. This is important or else the baseband update will not work and you will get a 10xx error and need to use fixrecovery. (Works for iPhone 4 - will not work for iPad 2)

    so..does that mean that the 4.3.5 update updates your baseband?
    if so, we are doomed since it ipad2 3g cannot support fixrecovery.
    What that statement means is that the "FixRecovery" tool does not work on iPad2 since it relies on the limera1n exploit.

    The baseband on 4.3.5 IS THE SAME as 4.3.4 and 4.3.3. TinyUmbrella has been updated to allow the baseband signing process to bypass TU and get baseband blobs directly from Apple for iPad2. This should avoid the 1013 error altogether.

    If you are still getting a 1013 error when restoring, something is still wrong in the process. Rather than commenting / uncommenting lines from your hosts, simply delete EVERY reference to gs.apple..com from it, and also make sure you UNTICK "Set hosts to Cydia on exit" in TU and then exit the program. This should guarantee a completely clean hosts. I know Marilyn already said this, but it is important.

    Then restart TU and try again. "Start TSS Server", DFU Mode, Shift-Restore the 4.3.3 firmware. It should not generate an error for an iPad2 in this configuration.

    Check and recheck you actions. It is very easy to skip over stuff because you are assuming you are doing it right every time. I've wasted hours doing stuff like that in the past when the instructions were right in front of me and I was not following them correctly

    Good luck.
    I can't still make it.. omg!! pls anybody help ;(


Home | Forum | Active Topics | What's New

Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Similar Threads

  1. How to Fix iTunes Error 1013
    By Seadog in forum iPad Help
    Replies: 1
    Last Post: 09-11-2011, 01:56 AM
  2. Replies: 0
    Last Post: 06-12-2011, 02:00 PM
  3. Restoring
    By AppleAlias3 in forum iPad Help
    Replies: 20
    Last Post: 05-28-2011, 01:12 PM
  4. Error 3194 while restoring in itune IOS 4.3.2
    By satty in forum iPad Hacking
    Replies: 12
    Last Post: 05-10-2011, 06:04 PM
  5. Error 1015 when restoring iPad
    By gerjana in forum iPad Help
    Replies: 0
    Last Post: 10-20-2010, 07:05 AM

Search tags for this page

apple baseband could not find mux function
,
apple baseband mux function
,
applebaseband could not find mux function
,

error 1013

,
error 4.3
,
identified device as (null) sorry device is not compatible with this jailbreak
,
sorry device is not compatible with this jailbreak
,
sorry device is not compatible with this jailbreak exiting libpois0n
Click on a term to search for related topics.

Tags for this Thread