TUTORIAL - Re-restore IOS 5.x on iPad2 and iPad3 using redsn0w and SHSH Blobs

Welcome to the iPadForums tutorial on how to re-restore your iPad2 or iPad3 device to a 5.x firmware using SHSH Blobs and redsn0w!

redsn0w continues to evolve to be far more than just a jailbreak tool, and the latest iteration delivers something the community has been eagerly anticipating since the release of IOS6. iPad2 and iPad3 owners can now re-restore their devices to previous versions of 5.x firmware provided they have saved SHSH Blobs. Before this tool was released, it was only possible to restore to IOS 6.0.

Quote:

---

NOTE - You must have saved SHSH Blobs for your device and the version of IOS you want to downgrade to. Without these, you cannot downgrade under any circumstances. No blobs = no downgrade. See our FAQ for more information about blobs - http://www.ipadforums.net/ipad-hacki...ed-2012-a.html.

Furthermore, if your device had its current installation of IOS done via the OTA method or you still have the factory installed IOS on there, redsn0w will not be able to restore the device. For most jailbreakers this should not be a problem, since jailbreaking should not normally involve OTA updates of IOS. But if you have never been jailbroken or have a brand new device with 5.1.1, you may fall foul of this problem!

---

This tutorial will demonstrate the re-restore of an iPad3 from 5.1.1 to 5.1.1. The tool however will support the installation of ANY IOS 5.x firmware from ANY 5.x firmware version currently installed, provided you have the necessary blobs.

iPad2 owners with 4.x blobs may also use this tool to downgrade from 6.x all the way back to 4.x if their blobs allow! But the downgrade is only possible if you have 4.x blobs. It cannot work with 5.x :(

iPad3 owners CANNOT use redsn0w to downgrade from iOS 6.x as things stand. You must be on 5.x currently in order to proceed with an iPad3.

You do not need to be or have ever been jailbroken to use this tutorial, and the result will not make your device jailbroken (unless you follow the additional steps after Step 8)! This is simply a tutorial for re-restoring or downgrading your iPad2 or iPad3. As has been said, what you do need is saved blobs, but these are NOTHING to do with being jailbroken ;)

Preparation
In order to re-restore your device you will need a copy of the version of IOS you with to restore to. In this example it is 5.1.1 for the iPad3.
You can download the files you need from our handy thread. Make sure you pick the right files for your specific device - http://www.ipadforums.net/ipad-hacki...inks-ipad.html

Next, you need to download the latest version of redsn0w from the iPhone dev-team blog here - Dev-Team Blog
You will need at least version 0.9.15b1 or newer.

Let's Re-Restore!
1. Connect your iPad to your PC and shut down iTunes, if it automatically launches.
2. Launch redsn0w on your computer and select the "Extras" option (Don't forget to run the executable as an "Administrator" if you are using a Windows PC)
http://i938.photobucket.com/albums/a...pad/rrr_01.png
3. Press the "Even more" button…
http://i938.photobucket.com/albums/a...pad/rrr_02.png
4. Press "Restore"…
http://i938.photobucket.com/albums/a...pad/rrr_03.png
5. Press "IPSW"
http://i938.photobucket.com/albums/a...pad/rrr_04.png
6. Select the firmware file you with to re-restore, which you downloaded when preparing for this tutorial…
http://i938.photobucket.com/albums/a...pad/rrr_05.png
7. Assuming you have your blobs available either via Cydia or locally via TinyUmbrella, you can marvel as redsn0w works it's magic… :D
(if redsn0w cannot find your blobs, use the "Local" or "Remote" buttons help identify them)
http://i938.photobucket.com/albums/a...pad/rrr_06.png
http://i938.photobucket.com/albums/a...pad/rrr_07.png
http://i938.photobucket.com/albums/a...pad/rrr_08.png
http://i938.photobucket.com/albums/a...pad/rrr_09.png
http://i938.photobucket.com/albums/a...pad/rrr_10.png
8. Congratulations! Your iPad has now been re-restored to clean factory fresh IOS 5.1.1 (or whichever firmware you have chosen to re-restore with this method).
http://i938.photobucket.com/albums/a...pad/rrr_11.png
Optionally, if you also want to re-jailbreak the device...
9. Once you complete the setup Wizard on your iPad, go back to the main menu on redsn0w, and press "Jailbreak"
http://i938.photobucket.com/albums/a...pad/rrr_12.png
10. A few seconds later you will have a freshly restored device with a clean new jailbreak :D
http://i938.photobucket.com/albums/a...pad/rrr_13.png
http://i938.photobucket.com/albums/a...pad/rrr_14.png

There you have it. Re-restoration on the iPad3 or iPad2!

Does not work with ipad 3 on ios6. It will not downgrade ipad3.

Quote:

---

Originally Posted by NakedFaerie

Does not work with ipad 3 on ios6. It will not downgrade ipad3.

---

Correct. It does not say that it will anywhere in the tutorial or in the redsn0w announcement, does it? We have been quite clear that this would not allow an ios6 ipad3 downgrade for many weeks, since the dev-team first announced it!

Redsn0w can and will downgrade an iPad3 on 5.x if you have the necessary blobs.

I have added an explicit sentence for iPad3 owners on 6.0 who can't read details very well ;)

It asks me to put into recovery but yours does it automatically :S

Quote:

---

Originally Posted by GetPatriotized

It asks me to put into recovery but yours does it automatically :S

---

What combination of device, IOS, and blobs, are you using? redsn0w can probably only do certain things automagically under certain circumstances... :)

Once completed, please let us know what it was you managed to do and what differences there were with the tutorial above, and then we can keep a record of all the successful combinations and the difference between them...

Thanks for this tutorial! I just re-restored my iPad3 with zero problems!

All I did was plug in the iPad and follow the appropriate directions in the tutorial.

I was worried because I couldn't remember if I had put on 5.1.1 via OTA, but it turns out that I didn't. Worked a treat.

I have decided to restore from new, basically to get a brand-new, fresh iPad. So, now all I have to do is put it all back together. Oh, and I have to re-jailbreak it! :D

So, other than my self imposed restrictions due to restoring it from new, this was a piece of cake. Thanks again, f4780y, for this tutorial. Awesome job!

Marilyn

My pleasure :D

hi all

i`m very new here. i had facing a problem while re-restoring my jailbroken ipad 2 wifi model from 5.0.1 to 5.1.1 (follow the instructin on thi tutorial). it shows couldn`t restore screen. tried to redo the step, same error comeout. now my ipad stuck on dfu mode, dont know how. how to get out from dfu mode? i have try everything but none is working. someone help me.

Key question is: do you have the SHSH blobs for iOS 5.1.1 (the iOS you want to re-restore to)? If you don't have the blogs, that is why it won't work.

According to the Dev Team instructions, you should be able to boot normally by going back to the "Even More" screen from the "Restore" screen (in the redsn0w tool) or by using the "Recovery Fix" option in the tool if you've quit redsn0w before going back.

So, try that and see how it works. Good luck and let us know how you get on.

Marilyn

yes i have the blobs for 5.1.1 and 5.0.1. i also tried recovery fix but not working. tried to use sleep button and home button together, same result. if i try to use itunes to restore to ios 6 and after that use redsnow to re-restore to 5.1.1/5.0.1, do u think it will work?